DJI RS3 RS3PRO Ecosystem

9 Pins B-Box for RED KOMODO to RS3 Pins Timecode 5 Pins CTRL4 Pins USB Port,30cm cable is included

Item No.: KO-2
1.30cm cable is included
2.The second ext port can act as a pass though port to connect the control cable from a SmallHD Cine 7.
3.EXT port doesn`t have power out.

(RED KOMODO) to the BP-9 battery slot on the right side of the camera, or to the kit with 1/4 screws. And for the camera's
The EXT connector provides a breakout cable. When using a breakout box, a Canon BP-9 battery can also be installed in the slot on the left side of the camera.
Available ports include
  -R/S (3pin Fis cher)
Simple operation of the handle trigger box, 3-pin Fis cher trigger cable, etc. This interface is not powered
  Devices such as ARRI WCU-4 may require a CTRL port interface with cable K2.0015758
pin1:GND, pin2:N/C, pin3:GPI
- Timecode (0B 5pin) standard wiring for timecode input/output
pin1:GND, pin2:LTC-IN, pin3:N/C, pin4:N/C, pin5:LTC-OUT
-CTRL (00B 4pin)RED CTRL standard wiring
pin1:GND, pin2:UART-RX, pin3:GPO, pip4:UART-TX
5V available, 500mA max may need to enable power in camera menu
- Sync Genlock (BNC) sync standard
Wiring Center: Signal, Shell; GND
-EXT input/output port

Reserve one EXT 0B9 pin output to ensure that the original line can continue to be used.